Removed some garbage files

42 files changed, 0 insertions, 681 deletions

diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/64WIN155.TXT b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/64WIN155.TXT
deleted file mode 100644
index 1375f29..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/64WIN155.TXT
+++ /dev/null
@@ -1,66 +0,0 @@
-
-
-mach64, 64WIN155.ZIP
-*****************************
-
-1.0	Introduction
-2.0	Installation Notes
-3.0	mach64 1.55 Fixed list
-
-*****************************
-
-1.0     Introduction
-
-The mach64 device drivers supplied here are for Windows 3.1 and Windows 
-for Workgroups 3.11.
-
-*****************************
-
-2.0	Installation Notes
-
-IF YOU HAVE NOT INSTALLED A mach64 WINDOWS DRIVER PREVIOUSLY, YOU 
-MAYREQUIRE YOUR MICROSOFT WINDOWS DISKETTES TO COMPLETE THE 
-INSTALLATION OF THIS DRIVER.  
-
-1. Ensure that you have a copy LOAD64.ZIP.  It is available on the ATI 
-BBS, ftp site (ftp.atitech.ca), and on our CompuServe forum (GO 
-ATITECH).
-
-2. Ensure that you have a copy of PKUNZIP.EXE, v1.10 or later.  PKUNZIP 
-is available on most BBS and information services, including the ATI 
-BBS and CompuServe.
-
-3. Do NOT attempt to perform the driver installation from within 
-Windows Exit Windows completely, and perform the following operations 
-in DOS.
-
-4. Unzip LOAD64.ZIP and 64WIN155.ZIP into the same temporary directory 
-on your hard disk, then run the LOAD64.EXE utility.  For example:
-
-MD \ATITEMP
-PKUNZIP LOAD64.ZIP \ATITEMP
-PKUNZIP 64WIN155.ZIP \ATITEMP
-CD \ATITEMP
-LOAD64.EXE
-
-5. Follow the screen prompts for installing the Windows driver.  
-
-IF YOU RECEIVE AN ERROR MESSAGE, INDICATING THAT A CERTAIN FONT (.fon) 
-FILE IS NOT PRESENT, YOU WILL NEED TO RUN WINDOWS SETUP FROM DOS TO 
-COMPLETE THE INSTALLATION.  WINDOWS SETUP WILL PROMPT YOU FOR THE DISKS 
-ON WHICH THESE FONT FILES ARE FOUND.
-
-6. Once the driver has been installed, you can delete the contents of 
-the temporary directory (DEL \ATITEMP\*.*) and delete the directory 
-itself (RD \ATITEMP).  
-
-7. We recommend that you keep a copy of the ZIP files (64WIN155.ZIP and 
-LOAD64.ZIP), in case you need to install the driver again.      
-
-*****************************
-
-3.0	mach64 1.55 Fixed list
-
-This driver is primarily designed to support the complete ATI mach64 
-product line, it is not intended to correct outstanding issues.
-
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/ATIDESK.LZH b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/ATIDESK.LZH
deleted file mode 100644
index 2778aac..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/ATIDESK.LZH
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/CUSTOM.VDB b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/CUSTOM.VDB
deleted file mode 100644
index 1bd1bbd..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/CUSTOM.VDB
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/DRVRNOTE.LZH b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/DRVRNOTE.LZH
deleted file mode 100644
index fc3b97c..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/DRVRNOTE.LZH
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/IBM_8514.VDB b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/IBM_8514.VDB
deleted file mode 100644
index 01b55c7..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/IBM_8514.VDB
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/LOAD64.VSF b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/LOAD64.VSF
deleted file mode 100644
index bcf0d08..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/LOAD64.VSF
+++ /dev/null
@@ -1,46 +0,0 @@
-;---------------------------------------------------------------------------
-;                                 INSTALL.VSF
-;
-; NOTE: This file should be modified by authorized personnel only.
-;       Failure to do so may result in improper operation of card.
-;---------------------------------------------------------------------------
-
-[mfg_name]
-ATI Technologies Inc.
-[DRAM_ISA_name]
-ATI ISA mach64
-[VRAM_ISA_name]
-ATI ISA mach64
-[VRAM_EISA_name]
-ATI EISA mach64
-[VRAM_MCA_name]
-ATI MCA mach64
-[DRAM_VLB_name]
-ATI VLB mach64
-[VRAM_VLB_name]
-ATI VLB mach64
-[DRAM_PCI_name]
-ATI PCI mach64
-[VRAM_PCI_name]
-ATI PCI mach64
-[revision]
-1.55(BBS)
-[year]
-1995
-[border]
-1f
-[background]
-34
-[foreground]
-1f
-[background char]
-20
-[top banner color]
-4e
-[bottom banner color]
-4e
-[info window color]
-70
-[disk]
-win 1 .
-video 1 .
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/MACXE.LZH b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/MACXE.LZH
deleted file mode 100644
index 8ce1f77..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/MACXE.LZH
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/MACXS.LZH b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/MACXS.LZH
deleted file mode 100644
index f18a520..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/MACXS.LZH
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/MACXW.LZH b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/MACXW.LZH
deleted file mode 100644
index b0b007e..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/MACXW.LZH
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/MIT_15.VDB b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/MIT_15.VDB
deleted file mode 100644
index 05a044a..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/MIT_15.VDB
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/MIT_17.VDB b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/MIT_17.VDB
deleted file mode 100644
index f79957e..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/MIT_17.VDB
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/MIT_21.VDB b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/MIT_21.VDB
deleted file mode 100644
index 42c82cb..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/MIT_21.VDB
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/NEC_3FGX.VDB b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/NEC_3FGX.VDB
deleted file mode 100644
index fd82ac1..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/NEC_3FGX.VDB
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/NEC_4FG.VDB b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/NEC_4FG.VDB
deleted file mode 100644
index 039752b..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/NEC_4FG.VDB
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/NEC_5FG.VDB b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/NEC_5FG.VDB
deleted file mode 100644
index 32ed22f..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/NEC_5FG.VDB
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/NEC_6FG.VDB b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/NEC_6FG.VDB
deleted file mode 100644
index bdce6f8..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/NEC_6FG.VDB
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/SUPERVGA.VDB b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/SUPERVGA.VDB
deleted file mode 100644
index 4396eba..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/SUPERVGA.VDB
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/TIMEWARP.LZH b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/TIMEWARP.LZH
deleted file mode 100644
index 4ecb5bc..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/TIMEWARP.LZH
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/VESA75.VDB b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/VESA75.VDB
deleted file mode 100644
index 63d2869..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/VESA75.VDB
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/VGA.VDB b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/VGA.VDB
deleted file mode 100644
index 1977c65..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/VGA.VDB
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/WININST.EXE b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/WININST.EXE
deleted file mode 100644
index 7e7eef3..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/WININST.EXE
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/WININST.HLP b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/WININST.HLP
deleted file mode 100644
index 71c8a89..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/WININST.HLP
+++ /dev/null
@@ -1,122 +0,0 @@
-windir       83
-winundir     84
-WINver       85 86 89 86
-WIN31menu    88 88 87 87
-wife_check   90 90 90 90
-
-
-85
-If you have not yet installed a
-Windows directory onto your hard
-drive, exit to DOS, install one from
-the original Windows package, and
-run this installation program again.
-
-Select the version number of Windows
-that you have currently installed in
-your system.  If it is not on this
-menu, there may not be an
-appropriate display driver to
-support your version of Windows.
-Consult Customer Support at the
-phone number listed in the User's
-Guide.
-
-
-86
-Select the version number of Windows
-that you have installed in your
-system.  This program will attempt
-to uninstall the enhanced drivers
-that you have installed for this
-display adapter.  It will remove the
-drivers along with the associated
-files, and clean up the appropriate
-Windows .INI files.
-
-
-83
-For non-networked Windows, this
-entry should contain a full path to
-an EXISTING Windows directory.  If
-you have not yet installed Windows
-onto your hard drive, install one
-before running this program.
-
-For networked Windows, you have to
-install the display drivers to an
-existing local Windows directory in
-your own workstation.  Enter the
-full path to that directory.
-
-Format of this entry:
-
-           d:\dirname
-
-where d is the drive letter; dirname
-is the directory name starting from
-the root (i.e. the leading "\" must
-be present).
-
-
-84
-For non-networked Windows, this
-entry should contain a full path to
-the Windows directory, to which you
-have installed our enhanced drivers.
-
-For networked Windows, this entry is
-the local Windows directory in your
-own workstation, where you installed
-your display adapter.
-
-Format of this entry:
-
-           d:\dirname
-
-where d is the drive letter; dirname
-is the directory name starting from
-the root (i.e. the leading "\" must
-be present).
-
-
-87
-Select the option you desire.  All
-files, including the drivers and
-associated files, will be copied to
-your Windows directory.
-
-
-88
-Select the option you desire.  All
-files, including the drivers and
-associated files, will be copied to
-your Windows directory.
-
-The Multimedia Video Acceleration
-(MVA) drivers will accelerate Video
-playback performance when used with
-Microsoft's Video for Windows.  If
-you do not have Video for Windows
-installed on your system, do not
-select this option.
-
-
-89
-This selection will display the
-Installation Notes.
-
-These notes contain last minute
-information concerning the Windows
-driver that may not have made it
-into the User's Manual in time for
-publication.
-
-
-90
-Select the appropriate language
-version of Windows that you are
-installing for.
-
-
--1
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/WINVIDD.LZH b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/WINVIDD.LZH
deleted file mode 100644
index d693f3c..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/WINVIDD.LZH
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/WINVIDS.LZH b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/WINVIDS.LZH
deleted file mode 100644
index 9d56013..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/WINVIDS.LZH
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/WINVIDW.LZH b/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/WINVIDW.LZH
deleted file mode 100644
index da2a3de..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 3.11/64WIN155/WINVIDW.LZH
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/64W95101.TXT b/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/64W95101.TXT
deleted file mode 100644
index da952d4..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/64W95101.TXT
+++ /dev/null
@@ -1,132 +0,0 @@
-
-mach64, 64W95101.ZIP
-*****************************
-
-1.0     Introduction
-2.0     Installation Notes
-3.0     Changing Color Depth, Resolution and/or Font Sizes 
-4.0     mach64 Enhanced Windows 95 Driver Features
-
-*****************************
-
-1.0     Introduction
-
-This diskette contains the latest ATI Windows 95 mach64 enhanced 
-display driver.  This driver should be used if you experience any 
-difficulties with the driver provided on the Microsoft Windows 95 CDROM 
-or if you wish to access the new features provided by this driver. 
-
-*****************************
-
-2.0     Installation Notes
-
-1. Ensure that you have a copy of PKUNZIP.EXE, v1.10 or later.  PKUNZIP 
-is available on most BBS and information services, including the ATI 
-BBS and CompuServe.
-
-2. Start Windows 95. 
-
-3. Start an MS DOS prompt.
-
-4. Unzip 64W95101.ZIP into a temporary directory on your hard disk.  
-For example:
-
-MD \ATITEMP
-PKUNZIP 64W95101.ZIP \ATITEMP
-
-5. Exit the MS DOS prompt, and return to the Windows 95 desktop.
-
-The Windows 95 mach64 enhanced display driver is a Windows 95 mini 
-driver.  It is installed and configured using the standard Windows 95 
-configuration utilities. 
-									  
-6. Click the right mouse button in an empty area of the desktop and 
-select the Properties entry of the menu. 
- 
-7. Select the Settings page of the Display Properties sheet. 
- 
-8. Click the Change Display Type... button. 
- 
-9. In the Adapter Type area, click the Change... button.  
- 
-10. The Select Device Dialog box will appear.  Click the Have Disk... 
-button.  
- 
-11. Specify the source drive,(e.g. C:\ATITEMP) and click OK.  Highlight 
-the macxw4 entry and click OK to copy the driver to your hard disk. 
- 
-12. If you have not already configured your monitor type do so now. In 
-the Monitor Type area, click the Change... button and select the 
-appropriate monitor.  Click OK to apply your changes. 
- 
-13. Click Close to return to the Settings page. Click "Close" or 
-"Apply" to initiate your changes. 
- 
-14. Restart the computer to run Windows 95 using this new driver. 
- 
-15. Once the driver has been installed, you can delete the contents of 
-the temporary directory (DEL \ATITEMP\*.*) and delete the directory 
-itself (RD \ATITEMP).  
-
-16. We recommend that you keep a copy of the ZIP file, 64W95101.ZIP, in 
-case you need to install the driver again.      
-
-*****************************
-
-3.0     Changing Color Depth, Resolution and/or Font Sizes 
-
-When Windows 95 is up, you may configure your color depth, resolution  
-and/or font size in the Display Properties sheet as follows.  
- 
-1. Click the right mouse button in an empty area of the desktop 
-and select Properties.   
- 
-2. On the Settings page of the Display Properties sheet, choose your 
-preferred color support, resolutions and font size. Click "OK" or 
-"Apply" to initiate your changes. 
- 
-3. On the Adjustment Page of the Display Properties sheet, you may 
-further customize your display.  
- 
-Note that these values reflect the monitor configuration you performed  
-using the Settings page - Change Display Type - Monitor Type.  
- 
-4. Click Apply or OK to switch to the new setting. 
-
-Note: Windows 95 will require a re-start to implement certain display 
-      settings changes.
-
-*****************************
-
-4.0     mach64 Enhanced Windows 95 Driver Features
- 
-The Windows 95 mach64 Enhanced Features enhanced display driver 
-supports the following additional features: 
- 
- - The ATI Adjustment page is added to the Display Properties sheet to 
-   provide monitor setup and adjustment. Use this page to adjust your  
-   monitors refresh rate and adjust your screen size and position.  
- 
-   1. To invoke the ATI Adjustment page click the right mouse button  
-   in an empty area of the desktop. 
-    
-   2. Select the Properties entry.  
-    
-   3. Select the ATI Adjustment tab. 
- 
-  
- - The ATI Adapter Settings page is added to the Adapter Properties
-   sheet to provide low level hardware configuration.  
-    
-   1. To invoke the ATI Adapter Settings page activate the System 
-   applet in the Control Panel.  
-    
-   2. Select the Device Manager tab. 
- 
-   3. Double-click the Display adapters item in the list. 
-    
-   4. Double-click the ATI adapter entry.  
-    
-   5. Select the Settings tab.             
-    
- 
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/ATICTL32.DLL b/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/ATICTL32.DLL
deleted file mode 100644
index cfad834..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/ATICTL32.DLL
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/ATIDPLX.DLL b/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/ATIDPLX.DLL
deleted file mode 100644
index 88aaf83..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/ATIDPLX.DLL
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/ATIDPP.DLL b/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/ATIDPP.DLL
deleted file mode 100644
index 2c08f58..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/ATIDPP.DLL
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/ATIHAL64.DLL b/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/ATIHAL64.DLL
deleted file mode 100644
index 5248281..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/ATIHAL64.DLL
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/ATIPITA.DLL b/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/ATIPITA.DLL
deleted file mode 100644
index 34c595e..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/ATIPITA.DLL
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/ATIPXDEF.HLP b/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/ATIPXDEF.HLP
deleted file mode 100644
index ba82174..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/ATIPXDEF.HLP
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/MACXW4.DRV b/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/MACXW4.DRV
deleted file mode 100644
index 2f39af9..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/MACXW4.DRV
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/MACXW4.INF b/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/MACXW4.INF
deleted file mode 100644
index 77e71c1..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/MACXW4.INF
+++ /dev/null
@@ -1,140 +0,0 @@
-; INF file for mach64 MACXW4 display driver.
-
-[version]
-Class=DISPLAY
-signature="$Windows 95$"
-Provider=%Mfg%
-
-[SourceDisksNames]
-1="MACXW4",,1
-
-[SourceDisksFiles]
-macxw4.drv=1
-macxw4.vxd=1
-atihal64.dll=1
-atidpp.dll=1
-atidplx.dll=1
-atipita.dll=1
-atictl32.dll=1
-atipxdef.hlp=1
-
-;----------------------------------------
-; Manufacturers 
-
-[Manufacturer]
-"%Mfg%"=Mfg
-
-;----------------------------------------
-; Driver sections
-
-[Mfg]
-%*PNP0916.DeviceDesc%=MACXW4, *PNP0916			; mach64
-%PCI\VEN_1002&DEV_4758.DeviceDesc%=MACXW4, PCI\VEN_1002&DEV_4758        ; mach64
-
-;----------------------------------------
-; Install sections
-
-[MACXW4]
-CopyFiles=MACXW4_CopyFiles
-DelReg=DEL_CURRENT_REG
-AddReg=MACXW4_AddReg
-LogConfig=VGA.LogConfig
-
-;----------------------------------------
-; Common DelReg sections
-
-[DEL_CURRENT_REG]
-HKR,,DevLoader
-HKR,,Ver
-HKR,DEFAULT
-HKR,MODES
-HKR,CURRENT
-HKLM,"Software\Microsoft\Windows\CurrentVersion\Controls Folder\Display\shellex\PropertySheetHandlers\DriverPages"
-
-;----------------------------------------
-; Model AddReg sections
-
-[MACXW4_AddReg]
-HKR,,Ver,,4.0
-HKR,,DevLoader,,*vdd
-HKR,DEFAULT,Mode,,"8,640,480"
-HKR,DEFAULT,drv,,macxw4.drv
-HKR,DEFAULT,vdd,,"*vdd,*vflatd"
-HKR,DEFAULT,minivdd,,macxw4.vxd
-HKR,DEFAULT,RefreshRate,,"-1"
-HKR,DEFAULT,DDC,,"1"
-HKR,"MODES\4\640,480",drv,,vga.drv
-HKR,"MODES\4\640,480",vdd,,*vdd
-HKR,"MODES\4\800,600"
-HKR,"MODES\4\1024,768"
-HKR,"MODES\4\1152,864"
-HKR,"MODES\4\1280,1024"
-HKR,"MODES\4\1600,1200"
-HKR,"MODES\8\640,480"
-HKR,"MODES\8\800,600"
-HKR,"MODES\8\1024,768"
-HKR,"MODES\8\1152,864"
-HKR,"MODES\8\1280,1024"
-HKR,"MODES\8\1600,1200"
-HKR,"MODES\16\640,480"
-HKR,"MODES\16\800,600"
-HKR,"MODES\16\1024,768"
-HKR,"MODES\16\1152,864"
-HKR,"MODES\16\1280,1024"
-HKR,"MODES\16\1600,1200"
-HKR,"MODES\24\640,480"
-HKR,"MODES\24\800,600"
-HKR,"MODES\24\1024,768"
-HKR,"MODES\24\1152,864"
-HKR,"MODES\24\1280,1024"
-HKR,"MODES\32\640,480"
-HKR,"MODES\32\800,600"
-HKR,"MODES\32\1024,768"
-HKR,"MODES\32\1152,864"
-
-; property sheet reg additions
-
-HKR,,EnumPropPages,,"atidpp.dll,EnumPropPages"
-HKCR,"CLSID\{C7A2F400-9A8B-11CE-95C9-0020C500A670}\InProcServer32",,,"atidplx.dll"
-HKCR,"CLSID\{C7A2F400-9A8B-11CE-95C9-0020C500A670}\InProcServer32",ThreadingModel,,"Apartment"
-HKLM,"Software\Microsoft\Windows\CurrentVersion\Controls Folder\Display\shellex\PropertySheetHandlers\ATIPages",,,"{C7A2F400-9A8B-11CE-95C9-0020C500A670}"
-
-;----------------------------------------
-; File Update References
-
-[DestinationDirs]
-DefaultDestDir=11               ; LDID_SYS
-
-;----------------------------------------
-; CopyFiles sections
-
-[MACXW4_CopyFiles]
-macxw4.drv
-macxw4.vxd
-atihal64.dll
-atidpp.dll
-atidplx.dll
-atipita.dll
-atictl32.dll
-atipxdef.hlp
-
-;----------------------------------------
-; LogConfig sections
-
-[VGA.LogConfig]
-ConfigPriority=HARDWIRED
-IOConfig=3B0-3BB
-IOConfig=3C0-3DF
-MemConfig=A0000-AFFFF
-MemConfig=C0000-C7FFF,D0000-D7FFF,E0000-E7FFF
-MemConfig=B8000-BFFFF
-
-;----------------------------------------
-; User visible strings
-
-[Strings]
-ClassName="Display"
-Mfg="ATI Tech. - Enhanced"
-*PNP0916.DeviceDesc="ATI mach64 (macxw4)"
-PCI\VEN_1002&DEV_4758.DeviceDesc="ATI mach64 PCI (macxw4)"
-
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/MACXW4.VXD b/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/MACXW4.VXD
deleted file mode 100644
index 4b2a080..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/MACXW4.VXD
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/README.TXT b/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/README.TXT
deleted file mode 100644
index 107785f..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95101/README.TXT
+++ /dev/null
@@ -1,174 +0,0 @@
-*********************************************************************** 
- 
-			IMPORTANT INFORMATION 
-				for 
-	    Windows 95 mach64 enhanced display driver 
-*********************************************************************** 
-Windows 95 mach64 enhanced display driver               August 15, 1995 
-*********************************************************************** 
- 
-READ THIS FILE COMPLETELY BEFORE ATTEMPTING TO USE THIS PRODUCT ! 
- 
-**************************** 
- 
-Contents 
- 
-1.0     Introduction 
-2.0     Adapter Installation 
-3.0     Installation Notes for Windows 95 mach64 enhanced display driver 
-4.0     Features 
-5.0     Windows 95 mach64 enhanced display driver problems 
- 
- 
-**************************** 
- 
-1.0     Introduction 
- 
-This file contains last-minute updates that are not found in the User's 
-Guide or in any addendum accompanying the display adapter.  Please read 
-this file before proceeding with the installation. 
- 
-**************************** 
- 
-2.0     Adapter Installation 
- 
-Refer to the User's Guide for information on adapter installation. 
- 
- 
-**************************** 
- 
-3.0     Installation Notes for Windows 95 mach64 enhanced display driver 
- 
-NOTE: The following installation notes are based on a diskette install.
-      If you have downloaded the display driver, please consult 
-      64W95101.TXT for appropriate installation instructions. 
-      
-The Windows 95 mach64 enhanced display driver is a Windows 95 mini driver.  
-It is installed and configured using the standard Windows 95 configuration 
-utilities. 
-									  
-Note: Windows 95 will require a re-start to implement certain display 
-      settings 
- 
-1) Start Windows 95. 
- 
-2) Click the right mouse button in an empty area of the desktop and select 
-the Properties entry. 
- 
-3) Select the Settings page of the Display Properties sheet. 
- 
-4) Click the Change Display Type... button. 
- 
-5) In the Adapter Type area, click the Change... button.  
- 
-6) The Select Device Dialog box will appear.  Click the Have Disk... button.  
- 
-7) Insert the display driver install disk, specify the source drive, and 
-click OK.  Highlight the macxw4 entry and click OK to copy the driver to 
-your hard disk. 
- 
-8) If you have not already configured your monitor type do so now. In the  
-Monitor Type area, click the Change... button and select the appropriate  
-monitor.  Click OK to apply your changes. 
- 
-9) Click Close to return to the Settings page. Click "Close" or "Apply" 
-to initiate your changes. 
- 
-10) Restart the computer to run Windows 95 using this new driver. 
- 
-To change the color depth, resolution and/or font size 
- 
-When Windows 95 is up, you may configure your color depth, resolution  
-and/or font size in the Display Properties sheet as follows.  
- 
-11) Click the right mouse button in an empty area of the desktop 
-and select Properties.   
- 
-12) On the Settings page of the Display Properties sheet, choose your 
-preferred color support, resolutions and font size. Click "OK" or "Apply" 
-to initiate your changes. 
- 
- 
-13) On the Adjustment Page of the Display Properties sheet, you may further  
-customize your display.  
- 
-Note that these values reflect the monitor configuration you performed  
-in step 8 of this procedure.  
- 
-14) Click Apply or OK to switch to the new setting. 
-
-Note: Windows 95 will require a re-start to implement certain display 
-      settings 
- 
- 
-**************************** 
- 
-4.0     Features 
- 
-This diskette contains the latest ATI Windows 95 mach64 enhanced display  
-driver.  You should use this driver if you have problems with the driver 
-provided on the Microsoft Windows 95 CDROM or if you wish to access the  
-new features provided by this driver. 
- 
- 
-The Windows 95 mach64 enhanced display driver supports the following  
-additional features: 
- 
- - The ATI Adjustment page is added to the Display Properties sheet to 
-   provide monitor setup and adjustment. Use this page to adjust your  
-   monitors refresh rate and adjust your screen size and position.  
- 
-   1) To invoke the ATI Adjustment page click the right mouse button  
-   in an empty area of the desktop. 
-    
-   2) Select the Properties entry.  
-    
-   3) Select the ATI Adjustment tab. 
- 
-  
- - The ATI Adapter Settings page is added to the Adapter Properties sheet 
-   to provide low level hardware configuration.  
-    
-   1) To invoke the ATI Adapter Settings page activate the System applet  
-   in the Control Panel.  
-    
-   2) Select the Device Manager tab. 
- 
-   3) Double-click the Display adapters item in the list. 
-    
-   4) Double-click the ATI adapter entry.  
-    
-   5) Select the Settings tab.             
-    
- 
-**************************** 
- 
-5.0     Windows 95 mach64 enhanced display driver problems 
-  
-- The Windows 95 mach64 enhanced display driver is capable of using monitor 
-   timing data contained within Windows 95. This data is selected by  
-   configuring a monitor type at Windows 95 installation time or via the  
-   "Settings" page of the display properties sheet. If you change the  
-   selected monitor type via the "Settings" page of the display properties  
-   sheet the new timing data may not take effect until after restarting  
-   Windows 95. A solution to this problem is to always restart Windows 95  
-   after changing the monitor type. 
- 
- - The Windows 95 mach64 enhanced display driver is capable of using monitor 
-   timing data contained within Windows 95. This data is selected by  
-   configuring a monitor type at Windows 95 installation time or via the  
-   "Settings" page of the display properties sheet. The Windows 95 mach64  
-   enhanced display driver may incorrectly interpret Windows 95 monitor  
-   timing data for some older monitors which require interlaced modes.  
-   This may cause some options to be disabled. A solution to this problem  
-   is to select one of the "(Standard monitor types)" available via the  
-   settings page of the display properties sheet. 
- 
- - In Windows 95, display drivers can be installed via the "Add New 
-   Hardware" wizard. When the Windows 95 mach64 enhanced display driver 
-   is installed via the "Add New Hardware" wizard the "Settings" page does 
-   not get installed into the mach64 display adapter property sheet. A 
-   solution to this problem is to use the driver installation procedure 
-   described above. 
- 
-
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95303/64w95303.exe b/mach64g/Drivers & Utils/Drivers for Windows 95/64W95303/64w95303.exe
deleted file mode 100644
index 7608896..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95303/64w95303.exe
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95303/file_id.diz b/mach64g/Drivers & Utils/Drivers for Windows 95/64W95303/file_id.diz
deleted file mode 100644
index ae116fa..0000000
--- a/mach64g/Drivers & Utils/Drivers for Windows 95/64W95303/file_id.diz
+++ /dev/null
@@ -1 +0,0 @@
-Version 4.03.2119 Windows 95 display driver for use with mach64 GX or CT product families. This display driver is recommended for use with machGX and CT ATI products.   
diff --git a/mach64g/Drivers & Utils/Utils/64utl303.exe b/mach64g/Drivers & Utils/Utils/64utl303.exe
deleted file mode 100644
index 60a9110..0000000
--- a/mach64g/Drivers & Utils/Utils/64utl303.exe
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/Utils/atimct.exe b/mach64g/Drivers & Utils/Utils/atimct.exe
deleted file mode 100644
index 4dbdd28..0000000
--- a/mach64g/Drivers & Utils/Utils/atimct.exe
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/VESA Support/64VBE221.EXE b/mach64g/Drivers & Utils/VESA Support/64VBE221.EXE
deleted file mode 100644
index 956488d..0000000
--- a/mach64g/Drivers & Utils/VESA Support/64VBE221.EXE
+++ /dev/null
diff --git a/mach64g/Drivers & Utils/VESA Support/64vbe210.exe b/mach64g/Drivers & Utils/VESA Support/64vbe210.exe
deleted file mode 100644
index 1477464..0000000
--- a/mach64g/Drivers & Utils/VESA Support/64vbe210.exe
+++ /dev/null